Maintaining your sewage pump may not be the most exciting thing you need to be doing. But it is necessary. A neglected pumping system will lead to unpleasant consequences such as costly repairs and sewage backups. Cleaning your ejector pump is a straightforward process. You should start by turning off the circuit breaker and opening the access panel. You should then check the level of the oil and remove any debris outside the ejector pump. You will be on your way to an efficient pumping system.
You don’t have to let sewage backups and clogs wreak havoc on the plumbing system of your home. A properly maintained ejector pump is the key to preventing such issues. You can clean your pump effectively and quickly even though it seems daunting.
Turn off the circuit breaker
Start by turning off the circuit breaker of your ejector pump. Turn it off to prevent accidents and electrical shocks. This is a safety measure that shouldn’t be overlooked. It could be life-threatening if you ignore this safety measure. You need to locate the circuit breaker and turn it off to ensure safety when cleaning your pump.
Open the access panel
Find the holding tank’s access panel and open it to start cleaning the tank. Remove any debris before you start. Get rid of everything such as paper towels or diapers from the holding tank. This can cause clogs.
Measure the level of oil in the motor
You should check the level of the oil in the motor of your sewage pump on hire. This is crucial for the proper functioning of your ejector pump. You should follow the manufacturer’s instructions to measure and add oil to the motor. Consult with documentation for your pump to ensure proper level measurement. Contact a professional if you get stuck or if you don’t know how to check the oil level.
Remove debris from outside the ejector pump
Check the surrounding of the pump for debris. You should look for tree branches, rocks and other debris found within the surrounding. Removing debris from the area will prevent future clogs and promote the proper function of the pump.
Examine the inlet valve of your pump
Examining the inlet valve of your pump and open areas is essential. It ensures the optimal functioning of the pump. Check for clogs or debris because these can hinder the performance of the pump. Use your tools or hands to remove any debris. This will ensure the pump functions properly.
Restart the circuit breaker
It is time to turn on the circuit breaker after cleaning the ejector pump. Turn on the circuit breaker once the access panel is closed. This will ensure the proper functioning of the pump. It is necessary to repeat the cleaning process if any issues arise.
What causes ejector pumps to clog?
Several things can clog a sewage pump. Some of these things include grease and oil, solid waste, clogs in the main sewer line, insufficient power, incorrectly set float valves, and improper maintenance. Make sure you deal with any irregularities in the performance of your pump before it worsens.